Installing Heat Sink Assembly; Power Connector Port - Dell P72S User Manual

NOTE: Remove the heat sink screws in the order listed on the heat sink.
NOTE: The WLAN cables need to be moved aside to access one of the heat sink assembly screws.
c. Lift the heat sink assembly away from the system board.

Installing heat sink assembly

1. Place the heat sink assembly on the system board.
2. Tighten the M2*3 screws to secure the heat sink assembly to the computer.
NOTE: Tighten the heat sink screws in the order listed on the heat sink.
3. Connect the system fan cable to the connector on the system board.
4. Install the:
a. battery
b. base cover
5. Follow the procedure in

Power connector port

Removing power connector port
1. Follow the procedure in
2. Remove the:
a. base cover
b. battery
3. To remove the power connector port:
After working on your thin
Before working on your thin
client.
client.
Disassembly and reassembly 29