4.
Load a full roll of print ribbon (the blue spool) onto the
spindle closest to the cartridge handle until it clicks
into place.
5.
Place the silver take‐up spool on the spindle with the
black gear until it clicks into place.
6.
Wind the take‐up spool counterclockwise one full
turn.
Load the Cleaning Sleeve
Load a new cleaning sleeve when you load a new roll
of print ribbon, when you notice debris on the
printed cards, or when the cleaning sleeve is no
longer sticky.
1.
Remove the cleaning roller spindle from the
ribbon cartridge.
2.
Slide the spindle into the continuous cleaning
sleeve (a).
3.
Place the spindle with the cleaning sleeve onto
the ribbon cartridge (b).
4.
Remove the protective wrapper from the cleaning sleeve (c).
CD800 Card Printer User's Guide
25