Xerox Color J75 Press System Administration Manual page 42

Using CentreWare Internet Services
1. Perform the following to access the network protocol settings.
a. Connect to CentreWare.
b. Click the Properties tab.
c. Click on the left of Connectivity and on the left of Protocols to display the items
in the folder.
2. Click LDAP Server.
3. Set the IP Address/Host Name & Port.
4. Set the Backup IP Address/Host Name & Port.
5. Set the Optional Information.
a) Type the search directory root path in the Search Directory Root field using Base
DN format.
b) Specify the login credentials required to access the LDAP directory. Options are:
Remotely Authenticated User and System.
c) Type the Login Name and Password, if needed. Retype the password to confirm.
d) Under Maximum Number of Search Results, type a number between 5 and 100
for the maximum number of addresses that can be returned matching the search
criteria entered. The default number is 25.
e) Under Search Timeout select Use LDAP Server Timeout to allow the printer to
time out based on the LDAP server settings, or select Wait and type in the number
of seconds between 5 and 120 that the printer will wait before timing out. The
default is 30 seconds.
f) If your primary LDAP server is connected to additional servers, select LDAP
Referrals to include those LDAP servers in your searches.
g) Type the maximum number of consecutive LDAP referrals in the LDAP Referral
Hop Limit field.
h) Under the Perform Query on heading, select Mapped Name Field to specify how
the name fields are mapped or Surname and Given Name Fields to search for
the user's last name and first name.
i) Select Apply.
6. Define user mappings which allow you to fine-tune server search results:
a) Select LDAP > LDAP User Mappings.
b) To send a test query, under Search, type the name of the user you want to search
for in the User Name field and select Search. If a match occurs, the user's
information displays.
c) Use the drop down menus under Imported Heading to remap fields as needed.
7. To configure filters for LDAP:
a) Select LDAP > Custom Filters.
b) In the User ID Query Filter field, type the LDAP search string or filter that you want
to apply. Format the search string as LDAP objects inside of parentheses.
c) Under Email Address Book Filter, select Enable Filter.
d) In the Email Address Book Filter field, type the LDAP search string or filter you
want to apply. Format the search string as LDAP objects inside of parentheses.
8. Select Apply.
3-14 Xerox Color J75 Press
®
System Administration Guide