Xerox Color J75 Press System Administration Manual page 162

Common Service Settings
Paper Type Priority
Set the paper type priority sequence for automatic tray selection. Automatic tray selection
means that a tray containing the appropriate paper is automatically selected by the
machine for copying or printing.
You can select from a variety of paper types including bond paper, plain paper, recycled
paper, side 2 paper, etc.
Note
The paper type selections for this feature will vary depending on your machine and your
work environment requirements (such as the types of paper you use most frequently).
Note
The paper type setting takes precedence over the tray priority sequence. If different
paper types appear in the same priority sequence, the paper selection is determined by
tray priority sequence.
1. From the Paper Tray Settings screen, select Paper Type Priority.
2. Select the item to be set or changed, and select Change Settings.
3. Select the priority sequence for this paper type.
4. Select Save to save the setting and to return to the Paper Type Priority screen.
5. Select Close to return to the Paper Tray Settings screen.
Auto Tray Switching Control
Choose the auto tray switching method and how to copy mixed size documents.
1. From the Paper Tray Settings screen, select Auto Tray Switching.
2. Select the item to be set or changed, and select Change Settings.
Gloss mode
The gloss mode feature can be used with either copy or print jobs. When it is enabled,
this feature produces an output with a glossy luster.
The administrator must enable this feature before it is available for selection for copy
or print jobs.
Note
This feature reduces the productivity of the machine by approximately 40-50%.
To enable this feature, perform the following steps.
1. Login as administrator.
2. Select Machine Status on the UI.
3. Access the Tools tab on the UI.
4. Select System Settings > Common Service Settings.
5. Select Other Settings > Gloss Mode.
9-54 Xerox Color J75 Press
®
System Administration Guide