Plug-In-Settings; Other Settings; Offset Stacking (Middle Right Tray); Auto Job Promotion - Xerox Color J75 Press System Administration Manual

7. Select the notification timing from Notify at the End of Job or Notify when Error
only.
8. Select Save.
9. Select an e-mail address from the Items list.
10. Select Change Settings.
11. Enter an e-mail address on the keypad.
12. Select Save twice to return to the Tools tab.

Plug-in-Settings

Plug-in Settings
1. Select Plug-in Settings.
2. Select either Embedded Plug-ins or select from a List of Embedded Plug-ins.

Other Settings

This feature allows you to select the default settings for miscellaneous other options
that relate to the machine.

Offset Stacking (Middle Right Tray)

Select the default offset stacking option for the finisher tray:
None: If this option is selected, the finishing tray will not offset any output.
Offset per set: If this option is selected, the finishing tray will offset each set of a
copy/print job. This option also offsets each job.
Offset per job: If this option is selected, all the sets of a job are delivered on one
stack to the output area. When the next job starts, that job is offset from the previous
job in the tray. This option does not offset each set of a job.

Auto Job Promotion

This Other Settings option allows you set the machine to automatically promote a job
for printing/copying if the machine is unable to start a prior job. For example, the machine
is unable to start an operation because there is no paper in the tray (at the start of a
copy or print operation). If this feature is enabled, then the machine can bypass the
current job and allows other jobs to start.
Xerox Color J75 Press
®
System Administration Guide
Common Service Settings
9-49