Xerox Color J75 Press System Administration Manual page 137

Note
Two lines are printed on the image of side 1 and one line is printed on the image
of side 2 of the sample that is printed with Sample Printout to indicate the paper
feed direction.
1 Paper feed direction
2 Line that appears only on Side 1
3 Y direction
4 X direction
b) Select Save or Close to return to the Type X screen.
c) If the position of the line on the sample output is misaligned, make adjustments
accordingly; proceed to the next step.
20. If the image needs adjustment, select one of the alignment items.
X Print Position
Y Print Position
X% - Magnification Width
Y% - Magnification Length
Perpendicularity
Skew
21. Select Change Settings.
The selected alignment item screen displays.
22. Enter the desired changes and select Save.
The Type X screen displays (for example Type 1).
23. Print another sample printout, review the sample, and if necessary continue to make
adjustments as required.
24. After you complete adjustment, print a final sample printout with Sample Printout
and check the adjustment results.
Xerox Color J75 Press
®
System Administration Guide
Common Service Settings
9-29