Xerox Color J75 Press System Administration Manual page 221

Setup and Calibration
Calibration
When you select Calibration, you will have the opportunity to move through a series of
steps to optimize the quality of copied jobs. The machine will print a calibration pattern
for you to place on the platen glass. The machine will scan the calibration pattern, and
automatically make adjustments as required.
1. Login as administrator.
2. Access the Tools tab on the UI.
3. Select Setup and Calibration.
4. Select Calibration.
5. Select the appropriate Screen Type, Paper Supply, and Target.
6. Select Start.
7. Follow the screen instructions.
8. Upon completion, select Close to return to Setup and Calibration.
9. Exit administrator mode.
Xerox Color J75 Press 18-13
®
System Administration Guide