Lpd; Snmp - Xerox Color J75 Press System Administration Manual

Using CentreWare Internet Services
h) Next to Release IP Address, select Enabled if you want the printer to release its
IP address when it restarts.
11. Select Apply.

LPD

The Line Printer Daemon (LPD) protocol is used to provide printer spooling and network
print server functionality for operating systems such as HP-UX ® , Linux ® , and MAC OS
X. This section describes the settings available for the LPD feature.
For information on setting up print queues on your client system, refer to your client
system's documentation.
1. Perform the following to access the network protocol settings.
a. Connect to CentreWare.
b. Click the Properties tab.
c. Click on the left of Connectivity and on the left of Protocols to display the items
in the folder.
2. Click LPD.
3. Type an LPD port number in the Port Number field or use the default of 515.
4. Select the Enable check box to enable the TBCP Filter.
5. Set the Connection Time-Out.
6. Set the Maximum Number of Sessions.
7. Next to TCP-MSS Mode, select Enabled if needed. This setting is common for LPD
and Port 9100.
8. If TCP-MSS Mode is enabled, under IPv4, type the IP Addresses for Subnet 1, 2 and
3.
9. Reflect the values as the machine's setting values.
a) Click Apply. A screen to enter the user name and password may display.
Note
The default User ID value is admin and password is 1111.
b) The right frame on the web browser will change to the machine reboot display.
c) Click Reboot. The machine will reboot and the setting value will be reflected.

SNMP

Simple Network Management Protocol (SNMP) is used in network management systems
to monitor network-attached devices for conditions that require administrative attention.
It consists of a set of standards for network management including an application layer,
a database schema, and a set of data objects. Agents, or software modules, reside in
the printer's SNMPv3 engine. A manager is an SNMPv3 management application such
as Open View that is used to monitor and configure devices on the network. The agent
responds to read (GET) and write (SET) requests from the manager and can also generate
alert messages, or Traps, based on certain events.
3-8 Xerox Color J75 Press
®
System Administration Guide