Crestron CT-1000 Operation Manual page 20

Touchpanels
16 • Series 1000 Wall-Mounted Touchpanels
PRO2 System View
The System Views lower pane displays the PRO2 system tree (refer to graphic
below). This tree can be expanded to display and configure the communications
ports.
Expanded PRO2 System Tree
C2Net-Device Slot in Configuration Manager
To incorporate the Series 1000 touchpanel into the system, drag the CT-1000 or
LC-1000 from the Touchpanels | Touchpanels (Cresnet) folder of the Device Library
and drop it in System Views. The PRO2 system tree displays the touchpanel in Slot 9,
with a default NET ID of "03" as shown in the following illustration.
NOTE: For the purposes of this manual, an LC-1000 is selected from the Device
Library.
NOTE: The first touchpanel in a system is preset with a NET ID of 03, when its
symbol is dragged into the upper pane of System Views. Additional touchpanels are
assigned different NET ID numbers as they are added.
C2Net Device, Slot 9
Crestron CT-1000 & LC-1000
Operations Guide – DOC. 5813B