Crestron CT-1000 Operation Manual page 40

Touchpanels
36 • Series 1000 Wall-Mounted Touchpanels
7. Position the mounting bracket/touchpanel assembly (less the plastic
buttons and faceplate) over the opening and apply equal pressure on the
four screw heads of the touchpanel until the assembly slides into place
(refer to illustration after the last step).
CAUTION: Do not apply excessive pressure to the touchscreen display during
installation. Doing so can crack the screen and damage the touchpanel.
8. Tighten four screws until mounting bracket/touchpanel assembly is
secure within the opening.
9. Install the plastic buttons by firmly pressing them into place (refer to
illustration after the last step). If buttons are engraved, be sure to match
button engraving with button functionality.
10. Firmly press on the plastic faceplate over the touchpanel (refer to
illustration after this step).
NOTE: If necessary, refer to "Touchpanel Removal" on page 13 for removal
procedure.
Secure Mounting Bracket/Touchpanel Assembly and Add Plastic Buttons and Faceplate
Crestron CT-1000 & LC-1000
Operations Guide – DOC. 5813B