Touchpanels
A firmware upgrade file has the
extension .csf.
30 • Series 1000 Wall-Mounted Touchpanels
Firmware Upgrade
To take advantage of all the Series 1000 touchpanel features, it is important that the
unit contains the latest firmware available. Therefore, please check the Crestron
website (http://www.crestron.com/downloads/software_updates.asp) for the latest
version of firmware. Not every product has a firmware upgrade, but as Crestron
improves functions, adds new features, and extends the capabilities of its products,
firmware upgrades are posted. To upgrade the firmware, complete the following
steps.
1. Make sure that "Communication Settings" that begins on page 25 has
been performed.
2. As shown after this step, select File Transfer | Update Touchpanel
Firmware from the Viewport menu.
File transfer | Update Touchpanel Firmware Command
3. As shown after this step, select the NET ID of the Series 1000
touchpanel and then click OK. The "Open" window appears (refer to
the subsequent graphic).
"Select Network ID" Window
NOTE: When transferring any Cresnet file (touchpanel project/firmware), lower the
port speed baud rate to 38400 to match the Cresnet bus speed.
Crestron CT-1000 & LC-1000
Operations Guide – DOC. 5813B