Crestron CT-1000 & LC-1000
Operations Guide – DOC. 5813B
File Transfer | Send Touchpanel Command
3. As shown after this step, select the NET ID of the Series 1000
touchpanel and then click OK. The "Open" window appears (refer to
the subsequent graphic).
"Select Network ID" Window
NOTE: When transferring any Cresnet file (touchpanel project/firmware), lower the
port speed baud rate to 38400 to match the Cresnet bus speed.
"Open" Window
4. Browse to the .hex file and click Open to begin the transfer.
Series 1000 Wall-Mounted Touchpanels • 29
Touchpanels