Teledyne 300 Instruction Manual page 48

4.11.2 Setting-up Data Channels
To setup a new data channel or modify an existing data channel, press SETUP-DAS-
EDIT to get into the DAS edit mode.
Once in the DAS edit mode, definitions of data channels may be created or modified by
using the MENU buttons described in the following table:
Button
PREV
NEXT
INS
DEL
EDIT
PRNT
The creation or modification of data channel definitions is accomplished by modifying
the properties of existing (or default) channel definitions. The table below lists all of the
properties defined for data channels.
P/N 02163G Teledyne API Model 300 CO Analyzer Instruction Manual - Page 42
Data Channel Edit Menu
Description
Moves to the previous data channel
Moves to the next data channel
Inserts a new data channel in front of the current
one (allowed up to 20 data channels)
Deletes the current data channel (prompts first)
Edits the properties of the current data channel
Prints a summary of all of the data channel on the
RS-232 port