Teledyne 300 Instruction Manual page 34

LED
Green
Yellow
Red
(1) This occurs during calibration holdoff, power-up holdoff and when in Diagnostic
P/N 02163G Teledyne API Model 300 CO Analyzer Instruction Manual - Page 28
STATUS LED's
State
Off Not monitoring, DAS Disabled
On Monitoring normally, taking DAS data
Blinking Monitoring, HOLD-OFF mode on, no
data to DAS (1)
Off Auto Cal disabled
On Auto Cal enabled
Blinking Calibrating
Off No warnings exist
Blinking Warnings exist
mode
TABLE 2.5
Meaning