Toyota RAV4 2020 Owner's Manual page 28

26
2-1. Basic information before operation
gestures.
●
Flick operations may not be performed smoothly at high altitudes.
Touch screen operation
This system is operated mainly
by the buttons on the screen.
(Referred to as screen buttons
in this manual.)
When a screen button is
touched, a beep sounds. (To
set the beep sound: P.55)
NOTICE
●
To prevent damaging the screen,
lightly touch the screen buttons with
your finger.
●
Do not use objects other than your
finger to touch the screen.
●
Wipe off fingerprints using a glass
cleaning cloth. Do not use chemical
cleaners to clean the screen, as
they may damage the touch screen.
●
Do not use the following liquids to
clean the screen, as they may
cause discoloration: Organic solu-
tions, such as benzine, gasoline or
alcohol, and alkaline solutions.
●
If the system does not respond to
touching a screen button, move your
finger away from the screen and then
touch it again.
●
Dimmed screen buttons cannot be
operated.
●
The displayed image may become
darker and moving images may be
slightly distorted when the screen is
cold.
●
In extremely cold conditions, the
screen may not be displayed and the
data input by a user may be deleted.
Also, the screen buttons may be
harder than usual to depress.
●
When you look at the screen through
polarized material such as polarized
sunglasses, the screen may be dark
and hard to see. If so, look at the
screen from different angles, adjust
the screen settings on the display set-
tings screen or take off your sun-
glasses.
●
When is displayed on the
screen, select
previous screen.
Capacitive touch screen but-
tons
The operable areas of the capaci-
tive touch screen buttons use
capacitive touch sensors and may
not operate properly in the following
situations:
 If the screen is dirty or wet
 If a source of strong electromag-
netic waves is brought near the
screen
 If a glove is worn during opera-
tion
 If the screen is touched by a fin-
gernail
 If a stylus is used to operate the
buttons
 If your palm touches the opera-
ble area of another button during
operation
 If a button is touched quickly
to return to the