Toyota RAV4 2020 Owner's Manual page 227

7-1. Phone operation (Hands-free system for cellular phones)
2
Check that a confirmation
screen is displayed when the
operation is complete.
■
For PBAP incompatible but
OPP compatible Bluetooth
phones
1
Select the desired item.
A Select to transfer the contacts
from the connected cellular
phone.
Transfer the contact data to the
system using a Bluetooth
phone.
B Select to add a new contact
manually.
Follow the steps in "Registering
a new contact to the contacts
list" from step 2. (P.238)
C Select to cancel transferring.
●
If your cellular phone is neither PBAP
nor OPP compatible, the contacts
cannot be transferred using
®
Bluetooth . But the contacts can be
transferred from USB device.
(P.237)
●
Depending on the type of Bluetooth
phone:
• It may be necessary to perform addi-
tional steps on the phone when trans-
ferring contact data.
• The registered image in the contact
list may not transfer depending on the
type of Bluetooth
By keypad
®
1
Display the phone top screen.
(P.218)
2
Select "Keypad" and enter the
phone number.
3
Select
switch on the steering wheel.
4
Check that the dialing screen is
displayed.
●
Depending on the type of Bluetooth
phone being connected, it may be
necessary to perform additional steps
on the phone.
By home screen
®
1
Display the home screen.
(P.27)
2
Select the desired contact.
3
Check that the dialing screen is
displayed.
■
Registering a new contact
1
Select and hold the screen but-
ton to add a contact.
2
Select the desired contact.
3
Select the desired number.
●
If there is no contact in the contacts
list, the contacts cannot be registered
®
at the home screen.
●
The contact cannot be registered at
the home screen while driving.
®
phone connected.
or press the
225
®
7