Toyota RAV4 2020 Owner's Manual page 153

Speech command system
operation
The speech command system is
operated by saying commands
which correspond to a supported
function. To display examples of
commands for supported func-
tions, select a function button on
the screen after starting the speech
command system.
1
Press the talk switch.
2
After hearing a beep, say a sup-
ported command.
 To display sample commands of
the desired function, say the
desired function or select the
desired function button. To dis-
play more commands, select
"More hints".
 Selecting "Help" or saying "Help"
prompts speech command sys-
tem to offer examples of com-
mands and operation methods.
 Voice guidance for the speech
command system can be
skipped by pressing the talk
switch.
 Registered names in the con-
tacts list etc., can be said in the
place of the "< >" next to the
commands. (P.152)
For example: Say "Call John
Smith" etc.
 If a desired outcome is not
shown, or if no selections are
available, perform one of the fol-
5-1. Speech command system operation
lowing to return to the previous
screen:
• Say "Go back".
• Select
 To cancel voice recognition,
select
talk switch, or say "Cancel".
 To perform the speech command
operation again, select "Start
over" or say "Start over".
 To suspend speech command
operation, select "Pause" or say
"Pause". To resume the speech
command operation, select
"Resume" or press the talk
switch.
●
If the system does not respond or the
confirmation screen does not disap-
pear, press the talk switch and try
again.
●
If a speech command cannot be rec-
ognized 3 consecutive times, the
speech command system will be can-
celed.
●
Voice recognition prompts can be set
to on or off on the voice settings
screen. (P.58)
This function can be used to cancel
voice guidance by turning the voice
prompts off. When you press the talk
switch while using this setting, a beep
sounds, and then you can immediately
say a command.
.
, press and hold the
151
5