230
7-1. Phone operation (Hands-free system for cellular phones)
"Full screen". (P.234)
• "E-mail notification pop-up" is set to
on. (P.234)
SMS/MMS:
• "Incoming SMS/MMS display" is set to
"Full screen". (P.234)
• "SMS/MMS notification pop-up" is set
to on. (P.234)
●
Depending on the type of Bluetooth
phone being connected, E-Mail func-
tion cannot be used via Bluetooth
Checking received mes-
sages
1
Display the message screen.
(P.229)
2
Select a desired account name.
3
Select the desired message
from the list.
4
Check that the message is dis-
played.
A
Select to call the message
sender.
B
Select to have messages read
out.
To cancel this function, select
"Stop".
When "Automatic message
readout" is set to on, messages
will be automatically read out.
(P.240)
C
Select to display the previous or
next message.
D
Select to reply to the message.
(P.230)
®
●
Reading a text message is not avail-
able while driving.
®
.
●
Depending on the type of Bluetooth
phone being connected, this function
cannot be used.
●
Depending on the type of Bluetooth
phone being connected, it may be
necessary to perform additional steps
on the phone.
●
Messages are displayed in the appro-
priate connected Bluetooth
registered mail address folder. Select
the desired folder name to be dis-
played.
●
Only received messages on the con-
nected Bluetooth
played.
●
The text of the message is not dis-
played while driving.
●
Turn the "POWER VOLUME" knob, or
use the volume control switch on the
steering wheel to adjust the message
read out volume while the message is
read out.
●
"Subject:" field is not shown on SMS
case.
●
E-mail only: Select "Mark unread" or
"Mark read" to mark mail unread or
read on the message screen. This
function is available when "Update
message read status on phone" is set
to on. (P.240)
Replying to a message
15 messages have already been
stored.
®
®
®
phone's
®
phone can be dis-