92
3-3. Route guidance
3
Select the desired route prefer-
ences and select "OK".
To select "4WD Tracks",
"Unsealed road" is required to be
on. When "Unsealed road" is off,
"4WD Tracks" will be dimmed.
●
Even if the "Motorways" route prefer-
ence is turned off, the route may not
be able to avoid motorway in some
cases.
●
If the calculated route includes a trip
by ferry, the route guidance shows a
sea route. After traveling by ferry, the
current position may be incorrect.
Upon reception of GPS signals, it is
automatically corrected.
Detour setting
During the route guidance, the
route can be changed to detour
around a section of the route where
a delay is caused by road repairs,
an accident, etc.
1
Select
on the map screen.
(P.64)
2
Select "Detour".
3
Select the desired detour dis-
tance.
A
Select to detour within 1 km of
the current position.
B
Select to detour within 3 km of
the current position.
C
Select to detour within 5 km of
the current position.
D
Select to detour on the entire
route.
E
Select to make the navigation
system search for the route
based on traffic congestion
information received from traffic
*
information.
(P.73)
*
: This function is not made available in
some countries or areas.
●
This picture shows an example of how
the navigation system would guide
around a delay caused by a traffic
jam.
A
This position indicates the location of
a traffic jam caused by road repairs,
an accident, etc.
B
This route indicates the detour sug-
gested by the navigation system.
●
When the vehicle is on a motorway,
the detour distance selections are 5,
15 and 25 km if units are in km.
●
The navigation system may not be
able to calculate a detour route
depending on the selected distance
and surrounding road conditions.