Toyota RAV4 2020 Owner's Manual page 183

WARNING
●
In low temperatures, the screen
may darken or the image may
become faint. The image could dis-
tort when the vehicle is moving, or
you may become unable to see the
image on the screen. Be sure to
visually check all around the vehicle
both directly and using the mirrors
before proceeding.
●
If the tyre sizes are changed, the
position of the guide lines displayed
on the screen may change.
●
The camera uses a special lens.
The distances between objects and
pedestrians that appear in the
image displayed on the screen will
differ from the actual distances.
(P.207)
●
When an aftermarket part is
installed in the display area of the
screen.
NOTICE
●
In panoramic view, the system com-
bines images taken from the front,
back, left and right side cameras
into a single image. There are limits
to the range and content that can
be displayed. Familiarize yourself
with the characteristics of the pan-
oramic view monitor system before
using it.
●
Image clarity may decline at the
four corners of the panoramic view.
However, this is not a malfunction,
as these are the regions along the
border of each camera image
where the images are combined.
●
Depending on lighting conditions
near each of the cameras, bright
and dark patches may appear on
the panoramic view/moving
view/see-through view.
6-3. Panoramic view monitor
●
The panoramic view/moving
view/see-through view display does
not extend higher than the installa-
tion position and image capture
range of each camera.
●
There are blind spots around the
vehicle. Accordingly, there are
regions not displayed in panoramic
view/moving view/see-through
view.
●
Three-dimensional objects dis-
played in wide front view, rear view,
wide rear view or side view may not
be displayed in panoramic
view/moving view/see-through
view.
●
People and other three-dimensional
obstacles may appear differently
when displayed on the panoramic
view monitor. (These differences
include, among others, cases in
which displayed objects appear to
have fallen over, disappear near
image processing areas, appear
from image processing areas, or
when the actual distance to an
object differs from the displayed
position.)
●
When the back door, which is
equipped with the back camera, or
front doors, which are equipped
with door mirrors that have built-in
side cameras, are open, images will
not be displayed properly on the
panoramic view monitor.
●
The vehicle icon displayed in pan-
oramic view/moving view/see-
through view is a computer gener-
ated image. Accordingly, properties
such as the colour, shape and size
will differ from the actual vehicle.
For this reason, nearby three-
dimensional objects may appear to
be touching the vehicle, and actual
distances to three-dimensional
objects may differ from those dis-
played.
181
6