Toyota RAV4 2020 Owner's Manual page 100

98
3-4. Setup
 The list of memory points that
are registered in the selected
group will be displayed.
"Cancel group filter": Select to close the
displayed items, and display all groups.
3
Select the desired group.
Setting up areas to avoid
Areas to be avoided because of
traffic jams, construction work or
other reasons can be registered as
"Areas to avoid".
1
Display the navigation settings
screen. (P.94)
2
Select "Areas to avoid".
3
Select the desired item.
A Select to register areas to avoid.
(P.98)
B
Select to edit areas to avoid.
(P.98)
C
Select to delete areas to avoid.
(P.99)
Registering areas to avoid
1
Select "New".
2
Select the desired item to
search for the location. (P.75)
3
Select "Enter" when the setting
map screen appears.
4
Select either
change the size of the area to
be avoided and select "OK".
5
Select "OK" when the area to
avoid screen appears.
●
If a destination is entered in the area
to avoid or the route calculation can-
not be made without running through
the area to avoid, a route passing
through the area to be avoided may
be shown.
●
Up to 10 locations can be registered
as points/areas to avoid.
Editing areas to avoid
The name, location and/or area
size of a registered area can be
edited.
1
Select "Edit".
2
Select the desired area.
or to