Toyota RAV4 2020 Owner's Manual page 230

228
7-1. Phone operation (Hands-free system for cellular phones)
the characters "p" or "w". (e.g.
056133w0123p#1)
●
When the "p" pause tone is used, the
tone data up until the next pause tone
will be automatically sent after 2 sec-
onds have elapsed. When the "w"
pause tone is used, the tone data up
until the next pause tone will be auto-
matically sent after a user operation is
performed.
●
Release tones can be used when
automated operation of a phone
based service such as an answering
machine or bank phone service is
desired. A phone number with contin-
uous tone signals can be registered in
the contact list.
●
Tone data after a "w" pause tone can
be operated by speech command
during a call.
Transmit volume setting
1
Select "Outgoing call vol.".
2
Select the desired level for the
transmit volume.
3
Select to display previous
screen.
●
The sound quality of the voice heard
from the other party's speaker may be
negatively impacted.
●
"Outgoing call vol." is dimmed when
mute is on.
Switching calls while a call
is in progress
 When there are no calls on hold
during a call: "Hold" is displayed.
When selected, the current call is
placed on hold.
 When there is no current call, but
there is a call on hold: "Activate"
is displayed. When selected, the
system switches to the call that
was on hold.
 When there is another call on
hold during a call: "Swap calls" is
displayed. When selected, the
current call is placed on hold,
and the system switches to the
call that was on hold.
●
This function may not be available
depending on the type of cellular
phone.
Incoming call waiting
When a call is interrupted by a third
party while talking, the incoming
screen is displayed.
1
Select "Answer" or press the
switch on the steering wheel to
start talking with the other party.
 To refuse to receive the call:
Select "Decline".
 Each time "Swap calls" is
selected, the party who is on
hold will be switched.
●
This function may not be available
depending on the type of Bluetooth
phone.
®