Toyota RAV4 2020 Owner's Manual page 82

80
3-2. Destination search
played.
When "Near a suburb" is
selected
1
Select "Near a suburb".
2
Enter a suburb name and select
"Search".
"Option": Select to select a suburb in a
different way. (P.77)
3
Select the desired suburb name.
4
Select "OK" when the suburb
centre map screen is displayed.
5
Follow the steps in "Searching
by category" from step 3.
(P.79)
Searching by phone number
1
Select "Phone no.".
2
Enter a phone number and
select "OK".
 If multiple locations with the
same phone number exist, the
list screen will be displayed.
Searching by coordinates
Searching by latitude and longi-
tude coordinates is available using
both DMS format (for example:
12°34'56.7"), DEG format (for
example: 12.34567) and DMM for-
mat (for example: 12°34.567').
1
Display the destination screen.
(P.75)
2
Select "Coordinates".
3
Enter the latitude and longitude,
and select "OK".
Changing the coordinates
format
1
Select "Coordinates Format".
2
Select the desired coordinates
format and select "OK".
Searching by emergency
1
Display the destination screen.
(P.75)
2
Select "Emergency".
3
Select the desired emergency
category.
4
Select the desired destination.
●
The navigation system does not guide
in areas where route guidance is
unavailable. (P.111)
One-touch setting
home/favourite as a destina-
tion
To use this function, it is necessary
to register a home and/or a favour-
ite location. Up to 2 favourites can
be registered as preset destina-
tions. (P.94, 95)
To set the home or a preset desti-
nation as the destination, select the
corresponding button.
1
Turn the engine switch <power
switch> to ACC or ON.