7-1. Phone operation (Hands-free system for cellular phones)
1
Display the message screen.
(P.229)
2
Select the desired message
from the list.
3
Select "Reply".
4
Select the desired message.
: Select to edit the message.
(P.231)
5
Select "Send".
"Cancel": Select to cancel sending the
message.
While the message is being sent,
a sending message screen is
displayed.
6
Check that a confirmation
screen is displayed when the
operation is complete.
If an error message is displayed,
follow the guidance on the
screen to try again.
●
Depending on the type of Bluetooth
phone, reply function is not available.
■
Editing quick reply messages
This operation cannot be performed
while driving.
1
Select
corresponding to the
desired message to edit.
2
Select "OK" when editing is
completed.
●
To reset the edited quick reply mes-
sages, select "Default".
●
Quick message 1 ("I am driving and
will arrive in approximately [##] min-
*
utes.")
:
This message cannot be edited and
will automatically fill in [##] with the
navigation calculated estimated time
of arrival on the confirm message
screen.
If there are waypoints set, [##] to the
next waypoint will be shown.
If there is no route currently set in the
navigation system, quick message 1
cannot be selected.
●
Depending on the type of Bluetooth
phone used for receiving messages,
reply function may not be used.
*
: With navigation function
Calling the message sender
Calls can be made to an e-
mail/SMS/MMS message sender's
phone number.
This operation can be performed
while driving.
■
Calling from e-mail/SMS/MMS
message display
1
Display the message screen.
(P.229)
®
2
Select the desired message.
3
Select "Call" or press the
switch on the steering wheel.
If there are 2 or more phone
numbers, select the desired
number.
4
Check that the dialing screen is
displayed.
■
Calling from a number within a
message
Calls can be made to a number
identified in a message's text area.
This operation cannot be performed
231
®
7