102
3-4. Setup
5
Select the desired POI icon.
6
Select "OK".
Low fuel warning
When the fuel level is low, a warn-
ing message will pop up on the
screen.
1
Display the detailed navigation
settings screen. (P.100)
2
Select "Guidance level for petrol
stations".
3
Select "150km", "100km",
"50km" or "Off".
Searching gas station in low
fuel warning
A nearby gas station can be
selected as a destination when the
fuel level is low.
1
Select "List" when the low fuel
warning appears.
2
Select the desired nearby gas
station.
3
Select "Enter" to set as a desti-
nation.
"Info": Select to display gas station
information. (P.72)
Current position/Tyre change
calibration
The current position mark can be
adjusted manually. Miscalculation
of the distance caused by tyre
replacement can also be adjusted.
1
Display the detailed navigation
settings screen. (P.100)
2
Select "Calibration".
3
Select the desired item.
For additional information on the
accuracy of a current position:
P.111
Position/Direction calibration
When driving, the current position
mark will be automatically corrected
by GPS signals. If GPS reception is
poor due to location, the current
position mark can be adjusted man-
ually.
1
Select "Position/Direction".
2
Scroll the map to the desired
point (P.68) and select "OK".
3
Select an arrow to adjust the
direction of the current position
mark and select "OK".
Tyre change calibration
The tyre change calibration function
will be used when replacing the
tyres. This function will adjust mis-
calculation caused by the circum-
ference difference between the old
and new tyres.
1
Select "Tyre change".
The quick distance calibration
starts automatically.
●
If this procedure is not performed
when the tyres are replaced, the cur-
rent position mark may be incorrectly
displayed.