Toyota RAV4 2020 Owner's Manual page 222

220
7-1. Phone operation (Hands-free system for cellular phones)
WARNING
●
Before using Bluetooth
users of any electrical medical
device other than implantable car-
diac pacemakers, cardiac resyn-
chronization therapy-pacemakers
or implantable cardioverter defi-
brillators should consult the manu-
facturer of the device for
information about its operation
under the influence of radio waves.
Radio waves could have unex-
pected effects on the operation of
such medical devices.
NOTICE
●
Do not leave your cellular phone in
the vehicle. The temperature inside
may rise to a level that could dam-
age the phone.
Registering/Connecting a
®
Bluetooth phone
To use the hands-free system for
cellular phones, it is necessary to
register a cellular phone with the
system. (P.34)
■
Connecting a Bluetooth
device

Registering an additional device
1
Display the phone top screen.
(P.218)
2
Select "Select device".
3
Select "Add device".
 When another Bluetooth
is connected, a confirmation
screen will be displayed. To dis-
connect the Bluetooth
select "Yes".
4
®
devices,
 Selecting a registered device
1
2
3
4
 If an error message is displayed,
follow the guidance on the
screen to try again.
■
Bluetooth
display
The condition of the Bluetooth
phone appears on the upper right
side of the screen. (P.16)
Using the phone
®
switch/microphone
■
Steering switch
By pressing the phone switch, a call
can be received or ended without
taking your hands off the steering
wheel.
®
device
®
device,
Follow the steps in "Registering
®
a Bluetooth phone for the first
time" from step 5. (P.34)
Display the phone top screen.
(P.218)
Select "Select device".
Select the desired device to be
connected.
Check that a confirmation
screen is displayed when the
connection is complete.
®
phone condition
®