Setting Legato Networker; Setting A Tape Library Type And Drive Type; Setting The Lus.conf File - Fujitsu ETERNUS LT160 Setup Manual

5.3

Setting Legato NetWorker

5.3.1

Setting a tape library type and drive type

The jbconfig command must be used to set the tape library type. Set the tape library type
and drive type as follows:
•
•
5.3.2

Setting the lus.conf file

Edit the /usr/kernel/drv/lus.conf file to add a GP7B8FC1 Fibre Channel adapter definition
(pci10cf,105c:26-32C) to the known-scsi-adapters entry.
# $Id: lus.conf.src,v 1.7.14.2 2001/03/07 05:19:30 caude Exp $ Copyright (c) 199
5, 1998, 1999, Legato Systems, Inc.
# Copyright (c) 1995, 1998, 1999, Legato Systems, Inc.
...
known-scsi-adapters="esp:8-7 SUNW,esp:8-7 isp:16-7 SUNW,isp:16-7 QLGC,isp:16-7 f
as:16-7 SUNW,fas:16-7 glm:16-7 SUNW,glm:16-7 pci1000,f:16-7 ifp:126-126 SUNW,ifp
:126-126 PTIX,isptwo:126-126 pci1077,2100:126-126 pci1077,1:126-126 pci9004,8478
:16-7 pci10df,f700:126-32C pci10df,f800:126-32C fca:126-32C fcaw:126-32C pci1242
,4643:126-32C JNI,FCE:126-32C
Note:
The range of the values in the known-scsi-adapters entry is the range indicated by double
quotation marks ("). A space is used to separate adapter definitions.
C144-E073-01EN
Tape library type: Install an Autodetected SCSI Jukebox
Drive type: LTO Ultrium
pci10cf,105c:126-32C ";
FC adapter (GP7B8FC1) definition
5.3 Setting Legato NetWorker
5-9