Table of Contents
Advertisement
RADIO FREQUENCY INTERFERENCE STATEMENT
The following notice is for EU users only.
WARNING: This is a product which meets Class A of EN55022. In a domestic
environment this product may cause radio interference in which case the user may be
required to take adequate measures.
The following notice is for USA users only.
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Laser Standard
The Fibre Channel printed circuit board contains a laser system (GBIC or GLM module).
Laser systems are classified as Class I Laser Equipment by the radiation standards of the
Department of Health and Human Services (DHHS) in accordance with Radiation
Control for Health and Safety Act of 1968 and also based on the safety requirements for
laser products in EN60825-1 (+A11). The certificate of conformance is affixed to the
module.
The contents of this manual shall not be disclosed in any way or reproduced in any media
without the express written permission of Fujitsu Limited.
All Rights Reserved, Copyright FUJITSU LIMITED 2002
C144-E073-01EN
Advertisement
Table of Contents
