Setting the Operating System
1) Execute the ls -l command to display a list of device files.
# cd /dev/rmt/
# ls -l
lrwxrwxrwx 1 root other 48 Sep 10 20:10 0 -> ../../devices/pci@17,2000/fibre-channel@1/st@0,0:
...
lrwxrwxrwx 1 root other 48 Sep 10 20:10 1 -> ../../devices/pci@16,2000/fibre-channel@1/st@1,0:
...
2) Check the symbolic link destination of the displayed device file.
4-12
../../device/pci@17,2000/fibre-channel@1/ st@0,0:
Check for the following.
•
Part A corresponds to the physical path name in the table in 8). Check whether
this physical path name exists in the table, and whether the value in the "Target
bind" column is the same as the value of part B.
•
Also, to determine whether the device is an expected one, check whether the
value of the LUN in the table in 8) matches the value of C.
A
B C
C144-E073-01EN