Table of Contents
Advertisement
2) Check the instance name and physical slot position of the Fibre Channel adapter
#
/usr/sbin/FJSVpfca/fc_info
adapter=fjpfca#0
own_port=N
bb_credit=0x3
adapter=fjpfca#1
own_port=N
bb_credit=0x3
C144-E073-01EN
(GP7B8FC1).
•
Checking instance names
Use the following command to check the name of the instance assigned to the
Fibre Channel adapter.
wwn=100000000e248c57
other_port=F
bb_frame_size=1024byte
wwn=100000000e248ba6
other_port=F
bb_frame_size=1024byte
•
Checking the physical slot position
Use the following command to identify the physical slot position of the Fibre
Channel adapter displayed using the instance name.
#
/usr/sbin/FJSVpfca/fc_adm
When this command is executed, the two LEDs on the Fibre Channel adapter for
the specified instance name blink. By using this procedure for all instance
names, you can check the physical slot position of each Fibre Channel adapter.
Note:
This command ends when Ctrl-C is typed or if three minutes has passed.
-a
link_status=up
e_d_tov=2000ms
r_a_tov=10000ms
link_status=up
e_d_tov=2000ms
r_a_tov=10000ms
-l
instance-name
4.1 Setting Solaris
port_id=0x11000
port_id=0x11100
4-7
Advertisement
Table of Contents
