Xilinx Virtex-6 FPGA Getting Started Manual page 46

Modifying the Virtex-6 FPGA Targeted Reference Design
X-Ref Target - Figure 39
46
This command invokes the Microsoft make routines to build the driver
components (Figure 39).
Figure 39: DMA Driver Compilation
On successful completion of the build, the driver file (xdma.sys) is available
under [objfre_wxp_x86|objchk_wxp_x86]\i386 depending on the build
environment selected. The Setup Information file (xdma.inf) is also available in
the same directory.
d. Compile XAUI path code: Navigate to the windows_driver/xaui directory and
execute this command:
build /w -ceZ
This command invokes the Microsoft make routines to build the driver
components (Figure 40).
www.xilinx.com Virtex-6 FPGA Connectivity Kit Getting Started
UG664 (v1.4) July 6, 2011
UG664_69_052011