X-Ref Target - Figure 10
Virtex-6 FPGA Connectivity Kit Getting Started
UG664 (v1.4) July 6, 2011
Getting Started with the Connectivity Targeted Reference Design Demo
e.
Click on Next. When the InstallShield wizard completes, click on Finish
(Figure
10). At the end of this install process, the driver and GUI files are copied to
the C:\Program Files\Xilinx Inc\Virtex6 folder. Also, a shortcut to the
Xilinx Performance Monitor (xpmon) GUI is available on the desktop.
Figure 10: InstallShield Wizard Copies GUI and Driver Files into Program Files
www.xilinx.com
when Done
UG664_61_060811
19