Xilinx Virtex-6 FPGA Getting Started Manual page 31

17. Performance Monitor Application: Start the data traffic.
X-Ref Target - Figure 23
Virtex-6 FPGA Connectivity Kit Getting Started
UG664 (v1.4) July 6, 2011
Getting Started with the Connectivity Targeted Reference Design Demo
a. To enable the XAUI datapath, click Start Test as shown in
This enables the driver to start generating the data traffic for the DMA channel
connected to the XAUI path.
b. To enable the Raw Data path in loopback mode, click Start Test as shown in
Figure 23.
Figure 23: Start Data Traffic from the Performance Monitor
www.xilinx.com
Figure 23.
UG664_09_090810
31