Getting Started with the Connectivity Targeted Reference Design Demo
8.
Note:
not have spaces.
9.
X-Ref Target - Figure 7
16
Copy the contents of the USB flash drive:
a.
The reference design files are provided on the USB flash drive delivered with the
connectivity kit.
b. Insert the USB flash drive into a USB connector of the PC system and copy the
v6_pcie_10Gdma_ddr3_xaui_axi folder to the PC system.
Ensure that the path where the v6_pcie_10Gdma_ddr3_xaui_axi folder is located does
Install the drivers and GUI:
a.
Navigate to the v6_pcie_10Gdma_ddr3_xaui_axi folder.
b. Double click on x_v6_trd_setup.exe
Figure 7: Run x_v6_trd_setup.exe
www.xilinx.com
(Figure
7).
Virtex-6 FPGA Connectivity Kit Getting Started
UG664 (v1.4) July 6, 2011
UG664_58_060811