Multi Mode; Selecting Multis - Kurzweil PC4 SE Musician's Manual

Chapter 4

Multi Mode

Use Multi Mode to play up to 5 split or layered Programs directly from the keyboard or via
MIDI. Each of the 5 Zones in a Multi can have a different Program, controller settings, and
MIDI transmit channel.
Multi Zones can also control external sound modules or computer software through a MIDI
or USB cable.
To enter Multi Mode from another Mode, press and turn on the MULTI Mode button.
The PC4 SE powers on with Multi 1 selected, or the Multi that was selected the last time
Global Mode was exited.

Selecting Multis

In Multi Mode, use any of the methods below to select a Multi.
Browse All Multis
Make sure the USER button is off, then use the ALPHA WHEEL or NAVIGATION
buttons to select a Multi from all of the available Multis.
Select a Multi by ID Number
The KEYPAD button allows you to use the numbers labeled on the CATEGORY buttons to
select Multis by ID number. Use the CATEGORY buttons to type an ID number followed
by pressing the ENTER button. Multis are not organized by category, so the KEYPAD
button is always on in Multi Mode.
Select a Previously Saved User Multi
Press and turn on the USER button, then use the ALPHA WHEEL or NAVIGATION
buttons to browse only User Multis. To return to browsing Factory and User Multis, press
and turn off the USER button.
Multi Mode
Selecting Multis
4-1