Save User Programs - Kurzweil PC4 SE Musician's Manual

Add Mod
Use the Add Mod parameter to change the range of CC values sent by the sequence using a
physical controller (in combination with the Scale, Scale Mod, and Add parameters).
The selected physical controller will use values 0-127 to add -127 through 127 to the CC
values sent from the sequence.
MIDI CC
Use the MIDI CC field to select a MIDI CC number and/or assigned program parameter
to control with a CC Sequence. If a MIDI CC number is assigned to a program parameter,
the program parameter name will be shown next to the CC number (for example "12 Filter
Freq").
Mode
Use the Mode parameter to select a preset or user pattern of CC Sequence steps.
When the Mode parameter is set to User, the user sequence is displayed. The CC value of
each step is shown as a number as well as represented by the height of a red and purple bar.
Use the NAVIGATION buttons to select each step and adjust each CC value. For each step,
the purple bar shows an approximation of the step value that will be sent after the Scale and
Add parameters have been applied.
The other Mode parameter settings each display a preset 16 step sequence. Each step of the
sequence has a red dot representing a CC value from 0 to 127.
Patterns with Random or Rand in the name will produce random values for each step. The
possible range of random values for each step is shown by white arrows.

Save User Programs

For details on saving User Programs, see Save User Programs on page
Program Edit Mode
Save User Programs
2-13.
3-31