Multi Edit Mode
Miscellaneous Page
Miscellaneous Page
The Miscellaneous Page shows various settings for each Zone.
Channel
The Channel parameter determines the MIDI transmit and receive channel for each Zone.
You can set this parameter to any of the 16 MIDI channels (1-16).
You can assign different Zones to the same channel, but only one Program can be loaded in a
channel at a particular time. The Program loaded will be whichever program change message
is received last.
Destination
The Destination parameter determines whether MIDI data generated by the keyboard and
physical controllers of each Zone is sent to a PC4 SE Program, through the MIDI Out/USB
ports, or all three. You can set this parameter to any of the eight combinations for the three
destinations for this parameter.
Note that Zone MIDI data is also affected by the Global Mode Destination parameter (see
page
6-10). For example if Global Mode Destination is set to MIDI, and Zone Destination
is set to Local + MIDI, transmission will be limited to MIDI only.
5-8