Kurzweil PC4 SE Musician's Manual page 120

Multi Edit Mode
Controls Page
Controller
Number
81
82
83
84
85
86
87
88
89
90
91–95
96
97
98
99
100
101
102–109
110-119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
145
5-32
Controller
Destination
MIDI 81 Default assignment for Switch 2
MIDI 82 Default assignment for Switch 3
MIDI 83 Default assignment for Switch 4
Portamento Standard MIDI controller for setting Portamento starting note
MIDI 85 Default assignment for Switch 5
MIDI 86 Default assignment for Switch 6
MIDI 87 Default assignment for Switch 7
MIDI 88 MIDI Controller 88
MIDI 89 Default assignment for Switch 8
MIDI 90 Default assignment for Switch 9
MIDI 91–95 MIDI Controllers 94–95
Data Inc Equivalent to pressing the Next Value button
Data Dec Equivalent to pressing the Previous Value button
NRegParL Non–Registered Parameter Least Significant Byte
NRegParM Non–Registered Parameter Most Significant Byte
RegParL Registered Parameter Least Significant Byte
RegParM Registered Parameter Most Significant Byte
MIDI 102–109 MIDI Controllers 102–109
MIDI 110–119 Reserved - Not available for use in the PC4 SE.
Sound Off Stops all sound in the corresponding channel.
RstCtls Resets Controllers to defaults in the corresponding channel.
Local Reserved for use by MIDI specification.
Notes Off Sends Note Off Message to all playing notes in the corresponding channel.
Poly Reserved for use by MIDI specification.
Omni Reserved for use by MIDI specification.
Mono On Reserved for use by MIDI specification.
Mono Off Reserved for use by MIDI specification.
Pitch Values above 64 and below 64 bend the pitch up and down, respectively.
PitchRev Values above 64 and below 64 bend the pitch down and up, respectively
PitchUp Values above 0 bend the pitch up
PitchDwn Values above 0 bend the pitch down
Pressure Default Destination for Pressure
Tempo Tempo
Triggers playback of notes by Key Number—e.g., C4 is 60. Send a velocity first with
KeyNum
Destination 135, KeyVel.
KeyVel Key Velocity
ProgInc Program Increment—increments current Program number.
ProgDec Program Decrement—decrements current Program number.
ProgGoto Go to Program—selects Program.
MultiInc Multi Increment—increments current Multi number.
MultiDec Multi Decrement—decrements current Multi number.
SetpGoto Go to Multi—selects Multi.
TransUp Transpose Up (ST)
Description