Kurzweil PC4 SE Musician's Manual page 32

Program Mode
Controllers
PITCH WHEEL
Use the PITCH WHEEL to perform pitch bends. The Bend Up and Bend Down amount
can be adjusted for each Program in Program Edit Mode.
MODULATION WHEEL
In Factory Programs, the MODULATION WHEEL will typically control vibrato or an
effect amount. The name and value of the current assignment is shown in the display when
the wheel is moved. The assignment can be adjusted in Program Edit Mode.
VARIATION Button
In Factory Programs, the VARIATION button will typically modify the sound by adding an
orchestral string section or synth pad layer, or enabling an effect. The name of the current
assignment is shown in the display when the button is pressed. The assignment can be
adjusted in Program Edit Mode.
ARPEGGIATOR Section
ARP and LATCH Buttons
Press the ARP button to turn the Arpeggiator On or Off. When the Arpeggiator is On, the
ARP button lights up.
The Arpeggiator allows you to easily play arpeggios or note sequences by holding down a
chord or a single note. Each program can be saved with different arpeggiator settings. For
details on the Arpeggiator, see
With certain arpeggiator settings, pressing the LATCH button allows the arpeggiator to
continue playing after notes are released on the keyboard.
CC SEQ Button
Press the CC SEQ button to turn the CC Sequencer On or Off. When the CC Sequencer is
On, the CC SEQ button lights up.
The CC Sequencer allows you to rhythmically modulate up to 4 program parameters (such as
filter frequency) based on preset or user patterns. For details on the CC Sequencer, see
CC Step Sequencer Page on page
2-6
Arpeggiator Page on page
3-27.
3-12.
MIDI