Fx Page - Kurzweil PC4 SE Musician's Manual

Program Edit Mode

FX Page

KB3 Organ FX Chain Parameters
For programs containing KB3 Organ FX Chain Parameters, different Value settings can
activate different effects. See below for each parameter and the available Value settings.
Chorus/Vibrato Select
Values 0-63 = Vibrato, 64-127 = Chorus.
Chorus/Vibrato Depth
Values 0-42 = Depth 1, 43-85 = Depth 2, 86-127 = Depth 3. Depth 1 has the least amount
of effect applied, Depth 3 has the most.
FX Page
Use the FX page to apply audio effects to a Program. You can select an Insert effects Chain
and 2 Aux effects Chains, all of which apply to all layers in the Program (unless Layer FX are
used, see below for details). In Program Mode, Programs on all MIDI channels share the Aux
chains of the Program on the currently selected MIDI channel.
The PC4 SE's Chains contain a variety of effects. Each Chain displays icons representing
the type of effects contained in the Chain, as well as the order of effects in the Chain (signal
flows from left to right). The PC4 SE's Chains include different types of reverb, chorus,
delay, flanger, phaser, tremolo, panner, rotary, distortion, EQ, compression, filter, envelope
following filter, frequency stimulator, ring modulator, frequency offset, pitch LFO, and
stereoizer.
3-4