Table of Contents
Advertisement
Sampling and Sample Editing
Live Mode
5. Edit the programÕs parameters for the effect(s) you want to use.
6. Play C 4, then input the audio source that you want to run through Live mode.
Live Mode Programs
ID
740
741
742
743
744
745
746
747
748
749
Live mode also includes two Live mode keymaps at 197 and 198 (Left and Right respectively).
Usage Notes
To use the programs, you must hold down a key (C 4, unless youÕre going for a special effect) for
the inputs to run through VAST. An alternative way to trigger the sound is to edit the control
setup found in the MIDI-mode TRANSMIT page. For example, on the SWITCH page in the
Setup Editor, you could set the switch type (SwType) to note toggle (Note T), and set the
destination (Dest) to C 4. This allows you to turn the program on and off via a button press, and
keeps sound sustaining while the button is on. Rack-model owners can get the same results with
any programmable switch controller. Keep in mind that if you change the Live mode program,
you need to restrike a key (or button) for the signal to go through that program.
You can also edit the Live mode keymap to ignore release if you want to use the keyboard to
activate Live mode.
You cannot sample and use Live mode together, the two functions use the same components.
Some Ideas for Using Live Mode
If youÕve ever used an old-fashioned mono analog synthesizer with an audio input (anything
from a Moog Rogue to an ARP 2500 or Serge Modular), you know how much fun it can be to
pass a musical signal through the synth and modify it in real time with the Þlters, envelopes,
modulators, etc. Live mode brings that concept to digital synthesis, and lets you use all of the
power of the K2600 on any kind of input signal.
14-42
For a stereo program, set Stereo to On on the KEYMAP page in the Program Editor.
Hint: Set VelTrk on the EditProg F4 AMP page to 0 dB; otherwise the velocity with which
you strike C 4 will affect your output. For alternative ways of triggering the sound (for
example, with assignable controller buttons or pedals), edit the control setup.
You should now hear your VASTed audio source through the K2600Õs Mix outputs.
Program Name
LM VirtualDesk 1
LM VirtualDesk 2
LM EQ Room Hall
LM TubeAmp_ Gtr
LM Synth Sliders
LM EQ StIm Hall
LM ParaFlange
LM EQ Overload
LM Filters
LiveMode Default
Advertisement
Table of Contents
