Chapter 5
Configuration Procedures for the Cisco 67x CPE Devices
Log On to the Cisco Broadband Operating System
Note
Determine the CBOS Version
78-11190-01
After connecting all the cables to the Cisco 67x and powering it on, start the
terminal emulation program and press the Enter key until the CBOS login screen
appears. When you see the welcome screen, you can log on to CBOS.
Hello!
Expanding CBOS image...
CBOS v2.3.5.012 - Release Software
Password:
If you have not set any passwords for the Cisco 67x, press the Enter
key when the system prompts you for a password to enter CBOS.
After you log on to CBOS, you can use the show version command to determine
the CBOS version of the Cisco 67x:
cbos# show version
The output for Cisco 67x configured for CAP line coding is similar to the
following:
Cisco Broadband Operating System
CBOS (tm) 678 Software (C678-I-M), Version v2.3.5.012 - Release
Software
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Jan 10 2000 03:54:07
CAP firmware version C.19
NVRAM image at 0x10357fe0
Log On to the Cisco Broadband Operating System
Cisco 600 Series Installation and Operation Guide
5-3