Using Telnet; Connecting From A Windows Nt Or Windows 95 Machine - Cisco 678 Installation And Operation Manual

Using Telnet

Step 3
Step 4
Note
Using Telnet
Caution

Connecting from a Windows NT or Windows 95 Machine

Step 1
Step 2
Step 3
Step 4
Step 5
Cisco 600 Series Installation and Operation Guide
3-6
To save the new WAN port configuration, enter:
cbos# write
To exit CBOS, enter:
cbos# quit
To close an ATM management connection, enter: set interface atmx
disable. To set the ADSL ATM VCI, repeat the previous steps
substituting atm1 for atm0.
Telnet provides a command-line interface for remote login connections between
machines on many networks, including the Internet. To establish a Telnet
connection to the CPE, Telnet must be enabled in CBOS.
Before closing a Telnet connection, always enter exit or quit at the
prompt.
cbos#
Click the Start button.
Select the Run... option.
When the Run box appears, enter
Click the OK button. The Connect menu appears.
Select the Remote System... option from the Connect menu. The Remote System
List Box appears. (See Figure 3-1.)
Chapter 3 Configuration Procedures for the Cisco 627
in the space provided.
telnet
78-11190-01