Scheduling System Reevaluation - Northern Telecom Meridian 1 Installation And Maintenance Manual

Page 146 of 220 Maintenance

Scheduling System Reevaluation

553-3601-200 Standard 7.00 November 1998
You can view the scheduled time for System Reevaluation or schedule a time
to run System Reevaluation.
Verifying the scheduled time
Press ƒ••‚ and enter the Installer password. The display
1.
shows A. Configuration.
Press ^ . The display shows
2.
Press * . The display shows
3.
Press ^ . The display shows Re-Evaluation .
4.
Press ^ . The display shows Re-Eval status .
5.
Press * . The display shows
6.
Press ^ . The display shows the time and date when System
7.
Reevaluation has been scheduled, or the display shows
Not scheduled
— If the time and date displayed are correct, press % three
times to continue in Configuration programming.
— To schedule System Reevaluation or change the scheduled time, go
to step 2 of "Setting a scheduled time or date".
— To cancel a scheduled System Reevaluation, press CANCEL .
Setting a scheduled time or date
Note: The system accepts only a date and time set later than the current date
and time.
1. Complete steps 1 to 7 of "Verifying the scheduled time".
2. Press CHANGE . The display shows
Calls will drop at set time
scheduled hour, or
If you do not want to change the scheduled time, go to step 4.
3. To schedule the time, press CHANGE . The display shows
followed by the current scheduled hour (
1. Telephony Data
2. Mobility Data
Re-Eval schedule
.
followed by the current
0:01
if a time has not been scheduled.
Hour:
00
if none scheduled).
.
.
.