Northern Telecom Meridian 1 Installation And Maintenance Manual page 197

Table 42 : Alarm troubleshooting (continued)
Alarm
Re-Eval
recommended
UTAM code req'd
Meaning
The Meridian
Companion system
has detected a
possible need for
System Re-
evaluation.
The wireless system
is disabled.
Meridian Companion Installation and Maintenance Guide
Troubleshooting Page 187 of 220
Possible causes and actions
This message displays when
• a Base Station is replaced with a new Base
Station
• a Base Station loses power but the TCM port
did not change
Action is left to installer's discretion.
• continue with System Reevaluation
• schedule a reevaluation
CLEAR
• the message and continue without
running System Reevaluation
This is normal for a new installation. Follow the
procedures described in "Activating wireless
communications" on page 93. The only other
time this alarm should appear is if you are
rebuilding a system:
1. Enter a UTAM Activation Code. See
"Activating a new system" on page 96.
2. Obtain a Regression Code. See "Entering
codes for system replacement and recovery"
on page 166.