Northern Telecom Meridian 1 Installation And Maintenance Manual page 145

Table 37 : TCM device states and actions
State
Idle
Disabling
Enabling
Failed
Equippd
Unequippd
Busy
Wait Idle
Maint
CSC Radio
Dsbl User
Dsbl Sys
Meaning
TCM device is enabled but not in use
TCM device is being disabled
TCM device is being enabled following
installation or a reset
TCM device has failed
will display for RAD or 7310 TCM
No TCM device has ever been
associated with the port number (type =
NONE).
TCM device is in use
TCM device will be disabled as soon as
current traffic terminates
TCM device is not in normal operating
mode (the Base Stations are not
configured into cells, or they are
downloading new software, or CDS is
running)
A radio is in use as a common signalling
channel. There is one radio per cell
designated as a CSC radio.
user has disabled TCM device
system has disabled TCM device
Meridian Companion Installation and Maintenance Guide
Maintenance Page 135 of 220
Possible action
TYPE
TYPE
TYPE
DSBL takes the failed device
offline and sets the state to
.
User
DSBL
The state becomes Idle
Busy when a TCM device
becomes associated with the
port number.
DSBL or TYPE
DSBL to disable immediately;
TYPE
configure using the Mobility Data
programming features
DSBL or TYPE
ENBL or TYPE
treat exception that caused TCM
device to become disabled
Dsbl
or