Adding Radio Credits - Northern Telecom Meridian 1 Installation And Maintenance Manual

Press ƒ••‚ and enter the Installer password. The display
4.
shows A. Configuration.
Press ^ .
5.
Press & . The display shows
6.
Press ^ . The display shows
7.
Press * . The display shows Codes .
8.
Press ^ . The display shows
9.
number. Use BKSP for corrections.
10. Press OK . The display shows
11. Press OK . The display shows
12. Press OK . The display shows
Note: If the code entry is unsuccessful, the display shows
13. Follow the procedure "Verifying Portable Credits" on page 122 or press
® to exit.

Adding Radio Credits

Radio Credits must have been ordered before you can proceed with the
following procedure.
To increase the number of Radio Credits assigned to a system, you must obtain
a UTAM Activation Code for the number of Radio Credits you require. The
code is then entered into the system.
To modify Radio Credits
1. Call Northern Telecom Customer Response Center (1-800-321-2649) to
get a UTAM Activation Code to change the number of Radio Credits
assigned to a system.
You will need to provide the Companion ID, the site zip code, and the
SSN.
Note: The Companion ID should be recorded in Meridian Companion
Invalid code
. If this happens, reenter the code or call
Northern Telecom Customer Response Center for assistance
(1-800-321-2649).
Programming and Provisioning Record.
Meridian Companion Installation and Maintenance Guide
Maintenance Page 149 of 220
4. Software Codes
SSN:nnnnnnnn
Code 1:
. Enter the first code
Code 2:
. Enter the second code number.
Code 3:
. Enter the third code number.
Entry Successful , then Codes
.
.
.