Northern Telecom Meridian 1 Installation And Maintenance Manual page 15

Hide thumbs Also See for Meridian 1:
Table of Contents

Advertisement

Introduction to Meridian Companion Page 5 of 220
To avoid electrical shock hazard to personnel
or equipment, observe the following
precautions when installing telephone
equipment:
• Never install telephone wiring during a
lightning storm.
• Never install telephone jacks in wet
locations unless the jack is specifically
designed for wet locations.
• Never touch noninsulated telephone wires
or terminals unless the telephone line has
been disconnected at the network
interface.
• Use caution when installing or modifying
the telephone lines.
To eliminate the possibility of accidental
damage to cords, plugs, jacks, and other
system components, do not use sharp
instruments during assembly procedures.
WARNING!
When a Base Station is installed off-premises
(when lines between the Meridian 1 system
and the Base Station run between separate
buildings), protect the telephone wiring and
Base Station at each end with secondary
lightning surge arrestors:
Oneac Corp. Model 6DP or
ITW LINX Model MP1A-90-27 or
RayChem TelTect 1-1H1-DAC (1 per unit) or
RayChem TelTect 1-Pin-DAC (1 per module)
or RayChem TelTect 5-5HX-DAC (5 per unit).
Meridian Companion Installation and Maintenance Guide
SHOCK!
CAUTION!

Advertisement

Table of Contents
loading

Related Products for Northern Telecom Meridian 1

Table of Contents