Table of Contents
Advertisement
Page 188 of 220 Troubleshooting
Table 42 : Alarm troubleshooting (continued)
Alarm
UTAM test failed
553-3601-200 Standard 7.00 November 1998
Meaning
The wireless system
is disabled. This
alarm will appear
only after a restart.
Possible causes and actions
The system detected an incorrect configuration,
possibly due to malfunctioning equipment.
1. Use the Administration Terminal or Companion
Manager to verify that radios have initialized
and are not defective (C. Maintenance).
2. Check
• that there is power to the Base Stations and
RPI or plug-top power supply
• that the location and number of Base
Stations are correct
• that there are at least four cells in the system
configuration
• all connections to the CCMC
• that there are sufficient Radio Credits to
support the number of Base Stations you
have connected
3. Restart the system with the correct system
configuration.
4. The system may require a UTAM Recovery
Code. See "Activating a disabled system" on
page 150.
Advertisement
Table of Contents
Troubleshooting
