GEM 533 eSyStep Operating Instructions Manual page 39

12.4.30 Analogue output
In- Sub- Off- Access
dex In- set Rights
dex
0xBA 1 R/W
2 R/W
3 R/W
4 R/W
Description of parameter values
Parameter
Analog Output Dir
Analog Output Type
Analog Out Min
(0.0% to Max)
Analog Out Max
(Min to 100%)
12.4.31 Debounce time initialization input
In- Sub- Off- Access
dex In- set Rights
dex
0xBC 0 R/W
Description of parameter values
Parameter
Debounce time ini-
tialization input (50 to 5000 ms)
www.gemu-group.com
Length Parameter
1 bit Analog Output Dir
2 bits Analog Output Type
16 bits Analog Out Min
16 bits Analog Out Max
Values
0 Specify direction of the set value output.
1 0 = Rise (rising)
1 = Fall (falling)
0 Determine signal output.
1 0 = 0 to 20 mA
2 1 = 4 to 20 mA
2 = 0 to 10 V
0 to Max Determine minimum value of the output.
Min to 1000 Determine maximum value of the output.
Length Parameter
Init Time
Values
50 to 5000 Determine time from applying the signal to starting initialization.
Type Default
boolean
uint:8
uint:16
uint:16 1000
Description
Type Default
uint:16
Description
39 / 52
12 Specific data IO-Link (pin 6)
Values
0 0
1
1 0
1
2
0 0 to Max
(0.0% to Max)
Min to 1000
(Min to 100%)
Values
150 50 to 5000
(50 to 5000 ms)
Positioner (Code S0)
GEMÜ 533